Skip to content

Model A Automatic Self-Cleaning Strainer

The Model A is designed for operation where the pressure 20 psi and up.

Payment and delivery details

Enquire

If you are interested in purchasing this product, please get in touch.

S.P. Kinney is most noted for our heavy-duty Model A and Model AP Automatic Self-Cleaning Strainers. The Model A is designed for operation where the pressure 20 psi and up. Both models employ the use of a rotating cylindrical drum with a number of threaded holes containing one of many types of straining media. The drum is supported on a rotating shaft fitted with bearings and is contained in a body having a vertical backwash slot opening adjacent to the drum surface.

APPLICATIONS

The Model “A” is designed for continuous removal of suspended particles from all types of liquids. Applications are in industrial plants using river, lake, well, or sea water for cooling, descaling, bearing lubrication, spraying, quenching, and similar purposes. Pipeline sizes: 2”- 42” or larger upon application. Liquids other than water, such as chemicals, acids, white water (paper mills), sewage, and ammonia flushing liquor (coke plants) can also be effectively strained.

INSTALLATION

Installation is made on the discharge side of a pump or in any piping system operating under a positive pressure. The mini mum working pressure required to effectively clean the straining media is 20 psi. The strainer is compact with small face- to-face, width, and height dimensions.

 

DESIGN

The strainer consists of a conical drum with a number of threaded holes containing one of many types of straining media. The drum is supported on a rotating shaft fitted with bearings and is contained in a body having a vertical backwash slot opening adjacent to the drum surface.

 

OPERATION

The liquid to be strained enters the inlet connection located in the lower portion of the body and flows around the outer surface of the drum. The suspended particles are retained in the media pockets, and the clean liquid passes through the media to the inside and bottom opening of the drum. The clean water can then continue through the outlet connection located diametrically opposite the inlet.

BACKWASH

As each row of straining media passes the backwash slot, a reversal of flow occurs, flushing the suspended particles from the media pockets. This reversal of flow is caused by a pressure differential between the interior of the strainer and the atmosphere. The backwash flow rate is exceptionally low and will vary, depending on the amount of suspended particles in the liquid.

AUTOMATIC BACKWASH CONTROL

In lieu of a manually operated backwash valve, an automatic control can be furnished to permit intermittent backflushing. This control consists of an electric or pneumatically operated ball valve, actuated by a timer or a pressure differential switch (or both).

ADJUSTMENT AND SHEARING ACTION

The clearance between the backwash slot and the drum is equal to or smaller than the opening presented in the media and can be adjusted easily by two locknuts on the threaded part of the top section of the shaft. The backwash slot contains a knife-like edge which enables the strainer to shear debris such as wood, shells, fish, and other suspended materials which may extend beyond the surface of the drum – with no resultant damage to the drum, straining media, or drive unit.

INSPECTION

The Kinney Model “A” strainer eliminates troublesome disassembly by providing an opening in the side of the strainer body. To inspect the straining media, simply remove the cover and manually rotate the drum. As each row of media passes the inspection opening, easy access to the media is achieved.

Model A Cast Strainer Brochure
Model A Fabricated Strainer Brochure

Related products

The FILTEC UltraFLEX is based on Ultra Filtration leading membrane manufacturers and includes fully automated operations for filtration, back pulse,…

Enquire

If you are interested in purchasing this product, please get in touch.

This product is currently out of stock and unavailable.

The FILTEC UF Guardian is a pressurised ultrafiltration water treatment solution to help you cost-effectively make water safer.

Enquire

If you are interested in purchasing this product, please get in touch.

This product is currently out of stock and unavailable.

As a pioneer of membrane technology, Suez leverages decades of research, development, and operational experience in developing the most advanced…

Enquire

If you are interested in purchasing this product, please get in touch.

The OptiView™ measures the UV transmittance (UVT) of drinking water continuously, accurately and in real-time.

Enquire

If you are interested in purchasing this product, please get in touch.

The TrojanUVFlex was designed for ease of maintenance and validated across a range of flows and UVTs, making it suitable…

Enquire

If you are interested in purchasing this product, please get in touch.

The TrojanUVSwift provides a flexible platform that allows for upgrades to meet new or more stringent requirements, such as changes…

Enquire

If you are interested in purchasing this product, please get in touch.

This product is currently out of stock and unavailable.

Payment

Payments can be made on by debit or credit card via our secure payment processor (Windcave)

Prices include GST.

Delivery

Freight Charges are determined by the size and weight of the items purchased.

Method
Cost
Example
Click and collect
Free
All items
Small / light items
$20.00
Lamps and consumables
Large / heavy items
$50.00
UV system
Extra Large / Very Heavy / Pallet items
$100.00
Domestic softener or pH neutraliser

Estimated Delivery Time

Nationwide up to 5 business days but can varying depending on weather events and courier capacity.

Basket

No products in the basket.

Just checking...

It looks like you’re visiting from New Zealand.